Skip to content Skip to footer

Leonov

Model 2

1.168,94  (ex. tax)

Discount: This model is part of our original generation of watches and is no longer produced.

Dial cut directly from the inside of the booster. The surface is lightly buffed, which means that every watch is different thanks to colour variations or unique traces of wear and tear.

This Swiss movement represents the latest generation of STP (Swiss Technology Production). It builds on the legendary ETA 2824.

The launch sequencer scale shows the stages of the rocket on its way to orbit. Information about the time, altitude and phases (rocket stages 1, 2 and 3) are arranged on the watch face, allowing the wearer to see when the three rocket stages would have been jettisoned.

Clear
Model 2

Leonov

Model 2

1.168,94  (ex. tax)

SKU: WL02 Category: Tags: , Product ID: 16848

Description

Original rocket aluminium.

Supplied with the leftover part of the rocket fragment.

The dial of this model is milled directly from the rocket and bears the original colour and surface quality (wear and tear, traces of colour). Thanks to these organic traces of wear and tear, each dial is totally unique on closer inspection.

During its mission, the rocket material left Earth and made contact with space at an altitude of 45 km.

Rocket Part
  • Inside of booster (tank)
Dial Colour
  • None, original aluminium surface
Dial Material
  • Unmodified rocket material

Flying Altitude
  • Over 45 km; mesosphere

Swiss watchmaking at its finest.

«Swiss Made» movement STP 1-11.

Swiss mechanical movement 1-11 by STP. The 1-11 is the next generation of the legendary ETA 2824, the best-selling Swiss movement of all time.

Powered by

  • Self-winding mechanical movement

Movement

  • STP 1-11

Timing tolerance

  • 15 sec/day +/-15

Power reserve

  • Up to 38 hours

Sojus MS-02. The rocket in the watch.

SOYUZ MS-02 was the name of a flight mission in which a Soyuz-series Russian spacecraft travelled to the International Space Station (ISS). It was the 48th visit of a Soyuz spacecraft to the ISS and the 154th flight in the Soyuz programme.

Soyuz-MS-02-Mission-Patch

Sojus MS-02

  • RAKETENTYP Soyuz-FG
  • RAKETENSTART 19. October 2016, 08:05 (UTC)
  • RAKETENABFLUG Kosmodrom Baikonur 1/5
  • Koordinaten 45.38°N 63.19°E

Crew

  • Crew 3 Personen
  • Commander Sergey Ryzhikov (RUS)
  • Flight engineer Andrei Borisenko (RUS)
  • Flight engineer Robert Shane Kimbrough (USA)

Rockets fly into space in three stages. The first stage is jettisoned in two parts: one at an altitude of 45 km, the second at an altitude of 85 km. The burnt-out rocket parts fall into the uninhabited steppe of Kazakhstan. Stage 3 reaches orbit at an altitude of about 200 km, just 8.59 seconds after leaving Earth. From this altitude, the spacecraft flies to the International Space Station at an altitude of about 400 km.

There is no ‘fixed boundary’ to outer space. Rather, the transition between space and the Earth’s atmosphere is fluid. The Fédération Aéronautique International (FAI) adopts the so-called Kármán line, which sets the boundary at an altitude of 100 km. For the US Air Force (USAF) outer space begins at 80 km. Viewed according to this definition, parts of the Soyuz fairing have crossed the boundary to outer space. These rarer watch models can be identified by their white dials and the lettering ‘FAIRING MATERIAL’.

Richly detailed. Expertly executed.

Design shaped by the rocket itself.

The rocket gives the space watch its ‘face’. Each dial retains the original colour and traces of the space mission.

‘BOOSTER SHELL’ means that the material originates from the booster. The coordinates on the dial indicate the launch point of the rocket in Baikonur. ‘ORBIT 8:49 MIN’ is a reminder of the time the rocket requires to reach orbit.

Open case back.

The rocket mission is engraved on the back of the watch.

The back of the watch is open to allow a glimpse at its most intricate component: the balance wheel. This oscillates constantly and breathes life into the mechanics.

Design. Manufacturing. Zurich.

All rocket watches are developed in our atelier in Zurich. We pay attention to the smallest detail and are uncompromising in our pursuit of quality.

Without big words, but with strong features

  • Modell Model 2
  • Kollektion Leonov
  • Antrieb Automatik (Selbstaufzug)
  • Uhrwerk STP 1-11
  • Uhrwerkausführung Standard
  • Zifferblattmaterial Originales Raketenmaterial
  • Zifferblattfarbe Keine originale Aluminiumoberfläche
  • Gehäusematerial Edelstahl
  • Durchmesser 40 mm
  • Höhe 14 mm
  • Armbandbreite 20 mm
  • Gewicht 111 g
  • Glas Saphir (kratzfest)
  • Wasserdicht 5 ATM (50 m)
  • Leuchtmittel Superluminova
  • Anzahl Rubine 26
  • Gangreserve 38 h
  • Frequenz 28’800 B/Hr, (4 HZ)

FAQ. Die Antworten darauf.

Alles Wichtige rund um deine Raketenuhr findest du bei den FAQ.

Bei der Bezahlung mit Kreditkarte musst du deinen persönlichen 3D Secure Code eingeben. Dies dient als zusätzlicher Schutz gegen Kredikartenmissbrauch. Wenn du zu lange mit der Eingabe des Codes wartest, wird die Zahlung storniert. Es kann zudem sein, dass der zu bezahlende Betrag höher ist als deine Tageslimite – oder dass du deine Monatslimite bereits ausgeschöpft hast. Aus diesen Gründen werden Transaktionen automatisch abgebrochen. Falls eine Zahlung bei Paypal nicht funktioniert, kann es ebenfalls auf Grund mangelnder Kontodeckung zum Zahlungsabbruch kommen. In diesem Fall empfehlen wir, per Vorkasse zu bezahlen. Keine Bange: Dein Geld ist bei uns gut aufgehoben und nicht verloren. Im Notfall, d.h. bei einer Stornierung wird es dir anstandslos zurücküberwiesen.

Armbänder in Standardgrösse passen der Mehrheit. Unsere Armbänder sind in den Standardgrössen verfügbar: S – 16–18 cm ,
M – 18–21.5 cm, L – 21.5–23.5 cm Stahlarmbänder können deinem Handgelenk angepasst werden. Es gibt sie deshalb nur in einer Einheitsgrösse.

Das Armband wird in einer Einheitsgrösse geliefert. Indem einzelne Glieder entnommen werden, wird es dem Handgelenk angepasst.

Es benötigt etwas Fingerspitzengefühl, man muss aber wirklich kein Uhrmacher sein, um das hinzukriegen. Die Montage braucht auch keine Anleitung, denn es ist klar, wo was hinkommt. Wer sich unsicher fühlt, lässt sich das Armband von einem Uhrmacher oder Juwelier (für ein Trinkgeld) in 5 min. anpassen. Etwas ist aber ganz wichtig: Zieht die Schrauben satt an. Auch da mit Feingefühl, denn wer die Schrauben zu fest anzieht, der riskiert, das feinmechanische Gewinde zu beschädigen. Die Schrauben halten dann nicht mehr, das Armband ist defekt.

Ja, sie hält einem Wasserdruck von bis zu 100 ATM stand (entspricht einer Wassersäule von 100 m). Achtung: Beim Sprung ins Wasser kann der Wasserdruck höher sein als in 100 m Wassertiefe. WICHTIG: Krone unter Wasser nicht betätigen!
Das kannst du. Falls du jedoch ein Textil- oder Lederarmband an der Uhr montiert hast, reduziert sich die Lebensdauer des Armbandes deutlich. Willst du mit der Uhr ins Wasser, empfehlen wir dir das Kautschuk- oder das Stahlarmband.
Das Uhrenglas ist kratzfest. Werenbach verwendet bei allen Uhren echtes Saphirglas. Das Gehäuse der Uhr ist aus Stahl und deshalb nicht kratzfest. Achtung: Das Glas auf der Rückseite ist kein Saphirglas und daher nicht kratzfest.
Nein. Ein starker Schlag kann dazu führen, dass das Uhrenglas einen Sprung oder Riss bekommt.
Ja, Werenbach verarbeitet Schweizer Uhrwerke von Sellita, Soprod, STP und Ronda.
Ja, das kannst du. Wir verwenden Superluminova-Leuchtmittel, das in der Nacht leuchtet. Voraussetzung dafür ist, dass sich die Leuchtzellen vorher aufgeladen haben (Tageslicht oder Lampe). Wer einen Pullover oder ein Hemd über der Uhr trägt, verhindert diesen «Aufladeprozess».